You are here

EZ-PD™ CCG2 USB Type-C to DisplayPort Cable Solution | Cypress Semiconductor

EZ-PD™ CCG2 USB Type-C to DisplayPort Cable Solution

최신 업데이트: 
2016년 8월 04일

The Type-C to DisplayPort cable solution enables connectivity between a USB Type-C receptacle and DisplayPort (DP) or Mini DisplayPort (mDP) receptacle.

The CCG2-based solution supports the below applications

  • Notebook Type-C receptacle to Monitor DP/mDP receptacle
  • Notebook DP/mDP receptacle to Monitor Type-C receptacle

USB Type-C to DP Adapter System Block Diagram

This cable solution will have a Type-C plug on one end and DP/mDP plug on the other end. The cable solution meets the requirements described in Section 4.2 of the VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.0 (Scenarios 2a and 2b USB Type-C to DisplayPort Cables). The solution also supports the USB Billboard Device Class used to communicate the DisplayPort Alternate Mode to a host system which does not support the DisplayPort mode. The cable solution uses two Cypress devices; CCG2 – a Type-C Port Controller and USB-Serial – a USB Bill Board controller.

CCG2 (CYPD2119) is Cypress’s Type-C controller which supports the DisplayPort as an Alternate Mode using the USB Type-C connector, in which several pins on the USB Type-C connector are re-configured to support the DisplayPort interface. CCG2 for the Type-C to DisplayPort cable solution is available in 24-QFN package. Cypress’s USB Billboard controller (CY7C65210) on this cable solution is a Full-Speed USB 2.0 device that supports the USB Billboard Device Class. This device is available in a 24-QFN package.

CY7C65210 belongs to Cypress’s USB-Serial Bridge controller family and is similar to CY7C65211 which has a configurable USB to I2C/SPI/UART channel. The USB-Serial family has an underlying powerful architecture with a Cortex-M0 and 32KB flash which allows flexible variants of products such as the CY7C65210 billboard device, simply by developing custom firmware.

CYPD2119 and CY7C65210 are in production. For more information, please contact Online Tech Support Case System