You are here

열 관리 | Cypress Semiconductor

블록 다이어그램

Thermal management is a mission-critical function for system reliability. The race to build higher performance systems is fueling the need to dissipate more heat per square inch of board space. The demand for energy efficient products and “always-on” cloud computing systems is driving the need to provide more advanced features such as hardware-based fan control, automatic noise reduction, and predictive fan failure algorithms.

Cypress’s Programmable System-on-Chip (PSoC) is a unique programmable architecture that allows system designers to do more with less. PSoC offers the best-in-class performance - hardware and/or firmware control for up to 16 fans, support for the largest number of analog and digital temperature sensors, thermal zone management algorithms, EEPROM based fault logging and predictive fan failure algorithms - perfect for designing systems to meet ever-increasing reliability standards. PSoC’s ability to integrate disparate analog and digital functions allows all this and more, while lowering your BOM costs.

Design Considerations

Design Challenges

The race to build higher performance systems is posing new challenges to designers.

  1. Mission-critical systems cannot tolerate Thermal Management failures
    • When fans wear out or become blocked, or
    • When SMBus interfaces to the Host Processor go down
  2. Fans create noise and consume significant power at maximum rpm
    • They must be driven at the minimum feasible rpm to minimize noise and power
    • They require a microcontroller running Thermal Algorithms to calculate minimum feasible rpm
  3. Every design requires difficult, time-consuming customization for
    • Different numbers of fans
    • Different types of Temperature Sensors
    • Specialized analog ICs for each Temperature Sensor
    • Microcontroller-based firmware algorithms to correct and linearize sensor outputs

PSoC solves these problems

  • PSoC monitors the fan rpm for failures and supports redundant SMBus interfaces to the Host Processor
  • The PSoC kit includes Thermal Algorithms that run on the PSoC microcontroller to minimize fan noise and power
  • One PSoC can control and monitor up to 16 fans and support up to 32 Temperature Sensors
  • PSoC integrates the specialized analog ICs for each Temperature Sensor, including the expensive ADC and IDAC Components
  • PSoC Temperature Sensor Components and User Modules provide firmware algorithms for accurate sensor conversion
  • PSoC Component and User Module Configuration Tools create customized Thermal Management configurations in minutes

PSoC provides a fail-safe, customized, one-chip Thermal Management subsystem solution

시작하기

  1. Select the right PSoC for your application (see table below)
    주요 기능
    PSoC 5
    PSoC 3
    PSoC 1
    Number of fans that can be controlled
    up to 16
    up to 16
    up to 8
    Number of temperature sensor inputs
    up to 32
    up to 32
    up to 24
    Temperature sensors supported
    Diode, RTD, Thermocouple, Thermistor
    Diode, RTD, Thermocouple, Thermistor
    Diode, RTD, Thermocouple, Thermistor
    ADC based voltage and current monitoring accuracy
    0.26%
    0.26%
    2%
    Redundant SMBus interface
    Support temperature sensors with I2C interfaces
  2. Watch a PSoC Thermal Management Training Video
  3. Download and Install the PSoC Integrated Design Environment
  4. Download the PSoC Thermal Management Application Note
  5. Purchase the PSoC Thermal Management Kit and Prototype the Example Project Design (bundled with kit)
  6. Configure your Design using Thermal Management Components or User Modules (Refer to the Thermal Management Application Note)

Integrate Additional Functions with PSoC

Apart from the standard Thermal Management functionality PSoC enables integration of additional functions. This could enable further BOM integration and cost savings (some examples below)

Power Supervision: AN76474 (PSoC 3 and PSoC 5), AN78646 (PSoC 1)

Temperature Sensing: Temperature Sensing & Control Solution

Miscellaneous Functions: I2C Mux, I2C Expander, I2C Level Translator, I2C Bridge, Reset control logic, MDIO Mux, MDIO Expander, LED Test & Drive, USB-UART Maintenance Ports, SGPIO Backplane & Enclosure Management. Contact your local Sales Representative

애플리케이션 설명

애플리케이션 설명
PSoC 5
PSoC 3
PSoC 1
Thermal Management Solution

개발 키트/보드

키트
PSoC 5
PSoC 3
PSoC 1
PSoC 개발 키트
PSoC Thermal Management Kit

애플리케이션 설명

개발 키트/보드

  • The CY8CKIT-001 PSoC® Development Kit (DVK) provides a common development platform where you can prototype and evaluate different solutions using any one of the PSoC 1, PSoC 3, PSoC 4, or PSoC 5 architectures.

  • The CY8CKIT-030 PSoC® 3 Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applications powered by Cypress’s CY8C38 high precision analog device family.

  • The PSoC Thermal Management Expansion Board Kit enables you to evaluate System Thermal Management functions and capabilities of the PSoC architecture.

  • The CY8CKIT-050 PSoC® 5LP Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applicati

소프트웨어와 드라이버

  • PSoC Creator

    PSoC Creator는 독자적인 강력한 하드웨어/소프트웨어 공동 설계 환경을 구성하기 위해 혁신적인 그래픽 디자인 편집기가 결합된 최신 소프트웨어 개발 IDE입니다.

  • PSoC Designer

    PSoC Designer는 혁신적인 통합 설계 환경(IDE)으로, 특정 애플리케이션 요구 사항에 맞게 PSoC를 사용자 지정하는 데 사용할 수 있습니다. PSoC Designer 소프트웨어를 사용하면 시스템 제조와 시장 출시 시기를 앞당길 수 있습니다.