You are here

AN2094 - PSoC® 1 - Getting Started with GPIO | Cypress Semiconductor

AN2094 - PSoC® 1 - Getting Started with GPIO

최신 업데이트: 
2020년 5월 28일
버전: 
*K

AN2094 discusses relevant topics on general-purpose input and output (GPIO) such as drive modes, shadow registers, and GPIO interrupts to get started with PSoC® 1 GPIOs. This document also provides a few tips and briefs of the other resources associated with PSoC 1 GPIOs.

日本語 !!

The general-purpose input and output (GPIO) is a very critical part of any microcontroller unit (MCU) as it forms the bridge between the external world and the MCU. The type and nature of this external world bridge depends on the end application. For instance, an ADC requires a GPIO to be an analog pin, whereas an I2C or SPI digital communication block requires the same GPIO to be digital. To set up this external world bridge, you need to know the end application and the GPIO system of the MCU that is used. PSoC, like any other controller, has its own GPIO system. This application note discusses the application-specific parameters of the GPIO system. A detailed technical overview of the system is available in the General Purpose I/O chapter of the PSoC Core section in the respective device TRM. 

Gpio Cell Structure

 





예제 프로젝트
지원되는 H/W 및 S/W 지원되는 PSoC1 장치
PSoC Designer 버전

H/W 키트


CY8C20xxx


CY8C21xxx


CY8C22xxx


CY8C23xxx


CY8C24xxx


CY8C27xxx


CY8C28xxx


CY8C29xxx
5.4 CY3210-PSoCEVAL1 x34 x23, x34

x45

  x23A, x94 x43 x x66

 

 

캠타시아 스크린캐스트에 사용

 

캠타시아 스크린캐스트에 사용

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.