You are here

AN84858 - PSoC® 4 Programming Using an External Microcontroller (HSSP) | Cypress Semiconductor

AN84858 - PSoC® 4 Programming Using an External Microcontroller (HSSP)

최신 업데이트: 
2021년 3월 10일
버전: 
*M
AN84858 shows you how to implement PSoC® 4 device programming with an external microcontroller by using modular C code. In this process, called Host Sourced Serial Programming (HSSP), the host microcontroller programs PSoC 4 through the serial wire debug (SWD) interface. The C code is written so that it can be ported to any microcontroller with minimal changes, speeding up HSSP application development for PSoC 4.
개요

PSoC 4 device programming refers specifically to the programming of the nonvolatile memory in PSoC 4 by using an external host programmer. The host can be the programmer supplied by Cypress (CY8CKIT-002 MiniProg3), a third-party programmer, or a custom programmer (e.g., an on-board microcontroller). This application note explains how to implement a host programmer to program a PSoC 4 device.



Project
Device
PSoC Creator

Version
Development Kit

CY8CKIT-xxx
Compiler
아키텍처
Silicon

Revision
V3.2

or higher
V3.0 or

Lower
001

DVK
Keil
GCC
MDK
RVDS
AN84858.zip
PSoC 5LP
Prod
아니오
아니오

Refer to KBA93541 for a method to program a PSoC 4 using CY8CKIT-049. 

Dear valued customer,

Thank you for choosing our products. They come with all the know-how and passion that our engineers have put into it. As you probably already know, Cypress is now Infineon. This is a major step for our company, but also for the good of you. 

Reliability and business continuity are of utmost importance for us. Hence, we remain fully committed to honoring existing customer and distributor relationships. This includes offering the legacy Cypress product portfolio. We thank you very much for your trusting support.

For the full version of this message, please download the PDF version.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.