You are here

AN86947 - Optimizing USB 3.0 Throughput with EZ-USB® FX3 | Cypress Semiconductor

AN86947 - Optimizing USB 3.0 Throughput with EZ-USB® FX3

최신 업데이트: 
2020년 5월 28일
버전: 
*D

USB 3.0 delivers a significant performance improvement over previous generations because it uses a 5-gigabit-per-second (SuperSpeed) signaling rate. However, the maximum achievable throughput also depends on critical factors such as host PC controller type, operating system, and USB design (transfer type and buffer sizes). This application note describes strategies for using an EZ-USB® FX3™ controller to maximize USB 3.0 data transfers.

개요

Cypress’s EZ-USB FX3, the next-generation USB 3.0 peripheral controller, provides highly integrated and flexible features that enable developers to add USB 3.0 functionality to any system.

USB 3.0 has a signaling rate of 5 Gbits per second, or 10 times the rate supported by USB 2.0. An FX3 device can deliver throughput close to the theoretical maximum supported by the USB 3.0 specification.

USB 3.0 promises a significant performance improvement over previous generations because it uses a 5-Gigabit-per-second (“SuperSpeed”) signaling rate. However, the maximum achievable throughput also depends on such critical factors as host PC controller type, operating system, and USB design (transfer type and buffer sizes). This application note shows you different strategies for using an EZ-USB®FX3™ controller to maximize USB 3.0 data transfers.

Please refer to the SuperSpeed Code Examples for more examples.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.