You are here

AN89659 - Interfacing SPI F-RAM with PSoC® 4 | Cypress Semiconductor

AN89659 - Interfacing SPI F-RAM with PSoC® 4

최신 업데이트: 
2020년 5월 30일

AN89659 shows how to interface Serial Peripheral Interface (SPI) F-RAM with Cypress's PSoC®4 (Programmable System-on-Chip) device with the help of example circuits, timing diagrams, and pseudo code. You can also use this application note as a reference design guide to interface SPI F-RAM with other standard SPI master controllers. This application note includes an associated PSoC 4 example project.


The SPI F-RAM is a serial nonvolatile memory employing an advanced ferroelectric process. A ferroelectric random access memory (F-RAM) is a nonvolatile RAM that eliminates the complexities, overhead, and system-level reliability problems caused by serial EEPROM and other nonvolatile memories. Unlike serial EEPROM and flash memories, the F-RAM performs write operations at bus speed without incurring any write delays (NoDelay™). Data is directly written into the memory array, and the next bus cycle can begin immediately without the need for data polling. The F-RAM products offer a very high endurance of 1014, orders of magnitude higher than serial EEPROM and flash memories.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.