You are here

AN95089 - PSoC® 4/PRoC™ BLE Crystal Oscillator Selection and Tuning Techniques | Cypress Semiconductor

AN95089 - PSoC® 4/PRoC™ BLE Crystal Oscillator Selection and Tuning Techniques

최신 업데이트: 
2020년 6월 24일
버전: 
*E
AN95089 guides you in selecting the external crystal oscillator (ECO) and watch crystal oscillator (WCO) for PSoC / PRoC BLE devices to achieve good RF performance. The AN gives insights into crystal basics and clock accuracy measurements. Cypress-recommended crystals and tuning techniques for optimum performance are also discussed.

개요

This application note helps you select the ECO crystal and the WCO crystal for PSoC 4/PRoC BLE devices and tune them for optimum performance.

Bluetooth Low Energy (BLE) is a timing-sensitive technology in which an inaccurate ECO clock can degrade the physical layer RF performance; similarly, an inaccurate WCO clock can lead to increased power consumption in a peripheral.

The on-chip ECO circuit with an external crystal is used to synthesize a 24-MHz clock to run the BLE subsystem. The clock sets the protocol timing for link-layer operations and derives the carrier frequency for physical-layer RF circuits.

An external WCO crystal is used to derive the 32.768-kHz clock that maintains link-layer timing synchronization when the BLE subsystem is in a low-power mode.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.