You are here

CY7C65213: USB-UART LP Bridge Controller | Cypress Semiconductor

CY7C65213: USB-UART LP Bridge Controller

최신 업데이트: 
2020년 5월 30일
버전: 
*P
CY7C65213 is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components. CY7C65213 includes a USB 2.0 Full-Speed controller, a UART transceiver, an internal regulator, an internal oscillator, and a 512-byte flash in a 32-pin QFN and 28-pin SSOP package.

CY7C65213/CY7C65213A is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components.

특징

  • USB 2.0 certified, Full-Speed (12 Mbps)
    • Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-specific drivers
    • Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev. 1.2 (peripheral detect only)
    • Integrated USB termination resistors
  • Single-channel configurable UART interfaces
    • Data rates up to 3 Mbps
    • 256 bytes for each transmit and receive buffer
    • Data format:
      • 7 to 8 data bits
      • 1 to 2 stop bits
      • No parity, even, odd, mark, or space parity
    • Supports parity, overrun, and framing errors
    • Supports flow control using CTS, RTS, DTR, DSR
  • General-purpose input/output (GPIO): 8 pins
  • For more, see pdf.

기능 개요

CY7C65213 is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components. CY7C65213 includes a USB 2.0 Full-Speed controller, a UART transceiver, an internal regulator, an internal oscillator, and a 512-byte flash in a 32-pin QFN and 28-pin SSOP package.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.