You are here

CY4603 HX3 USB 3.0 Hub Development Kit | Cypress Semiconductor

CY4603 HX3 USB 3.0 Hub Development Kit

최신 업데이트: 
2019년 7월 16일

CY4603 is an easy-to-use Development Kit to evaluate and develop solutions on the USB-IF certified CYUSB331x family of HX3 USB 3.0 hub controllers. This kit comes integrated with the required components to demonstrate application of HX3 for a 4-port USB 3.0 Hub. The kit also includes the Blaster Plus utility, a GUI based Cypress software tool to change the configuration parameters of HX3. This kit also demonstrates the GPIO configurability options available in HX3.

CY4603kit

Kit Features

  • Configurable GPIOs
  • Supports Battery Charging v1.2
  • Supports Ghost Charging™
  • Configure HX3 using I2C EEPROM or I2C slave mode
  • Supports Individual and Ganged Downstream port Power
  • 88-pin QFN package

Kit Contents

  • Development board (1)
  • USB 3.0 A to B cable (1)
  • 5V/4A Power Adaptor (1)
  • 빠른 시작 가이드
번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.