CY8CKIT-005 MiniProg4 Program and Debug Kit | Cypress Semiconductor
CY8CKIT-005 MiniProg4 Program and Debug Kit
The MiniProg4 Program and Debug Kit is an all-in-one development programmer and debugger for PSoC® 4, PSoC 5LP, and PSoC 6 MCU devices. Use MiniProg4 as a programmer or debug probe for supported Cypress devices. and development kits, like the PSoC 6 WiFi-BT Pioneer Kit.
MiniProg4 uses the industry standard CMSIS-DAP interface over Serial Wire Debug (SWD) protocol. It uses CMSIS-DAP V2.0.0 and V1.2.0 as the bulk and HID endpoints transport mechanisms. MiniProg4 implements USB bulk endpoints for faster communication. It also supports HID endpoints for use cases that require them, but communication is slower. Out of the box, MiniProg4 uses bulk endpoints.
MiniProg4 also provides USB-I2C, USB-SPI and USB-UART bridging functionality. MiniProg4 bridging capabilities are used by tools like CapSense. Tuner and the Device Firmware Upgrade Tool, delivered with ModusToolbox™ IDE. MiniProg4 support PSoC Creator, PSoC Programmer, and the Bridge Control Panel is planned.
If you need a program/debug kit for PSoC 1 or PSoC 3 devices, see the MiniProg3 web page.
|Connector||SWD||I2C||SPI||UART (With and Without Flow Control)|
|5-pin||예||해당 없음||해당 없음||해당 없음|
|10-pin||예||해당 없음||해당 없음||해당 없음|
|6x2 header||해당 없음||예||예||예|
The CY8CKIT-005 PSoC® MiniProg4 Program and Debug Kit includes:
- MiniProg4 programmer/debugger
- 10-pin ribbon cable
- USB Type-A to Type-C Cable
- QuickStart Guide
If your computer has a USB Type-C port, obtain a Type-C to Type-C cable, or a USB Type-A to Type-C adapter, from your preferred supplier.
Additional Programming Information
The MiniProg4 programmer is part of a suite of programming solutions available for PSoC users. For more information on programming options, see Cypress Programming Solutions.
The MiniProg4 programmer is not recommended for production programming. We suggest customers who need production programming consider our Programmer System Partners, or consult our distribution partners.
|Cypress Programmer 2.0||A complete package that installs all components required for a programming and debug solution.|
|ModusToolbox IDE||A single, coherent, and familiar design experience combining the industry’s most deployed WiFi and Bluetooth technologies, and the lowest power, most flexible MCUs with best-in-class sensing.|
|PSoC Programmer||A complete package that installs all components required for a programming and debug solution.|
|PSoC Creator||An Integrated Design Environment (IDE) that enables concurrent hardware and firmware editing, compiling and debugging of PSoC and FM0+ systems.|