CCG1 USB Type-C to HDMI/DVI/VGA Adapter Solution | Cypress Semiconductor
CCG1 USB Type-C to HDMI/DVI/VGA Adapter Solution
The Type-C to HDMI/DVI/VGA Adapter solution enables connectivity between a USB Type-C receptacle and HDMI/DVI/VGA plug. It enables users of any Notebook that implements USB-Type C to connect to an HDMI/DVI/VGA display.
This adapter solution will have a Type-C plug on one end and HDMI/DVI/VGA receptacle on the other end. The adapter solution meets the requirements described in Section 4.3 of the VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.0 (Figure 4-14: Scenarios 3c USB Type-C DFP_D to Protocol Converter). The adapter solution supports display output at resolution of up to 4K Ultra HD (3840x2160) at 60Hz. The solution also supports the USB Billboard Device Class used to communicate the DisplayPort Alternate Mode to a host system which does not support the DisplayPort Alternate mode.
VESA defines different pin assignments on the USB Type-C connector when sending and receiving DisplayPort signals. Cypress provides the option to configure your pin assignment on the USB Type-C connector for Display port or Protocol convertors (HDMI, DVI, VGA etc.). You can find further details on these options here.
The cable solution uses 2 Cypress devices; CCG1 – a Type-C Alternate Mode Port Controller and USB-Serial – a USB Bill Board controller. Cypress also has a CCG2 based solution for USB Type-C to HDMI adapter. You can find the schematics and BOM for this solution here.
CCG1 (CYPD1120) is Cypress’s first generation Type-C port controller which supports the DisplayPort as an Alternate Mode using the USB Type-C connector, in which several pins on the USB Type-C connector is re-configured to support the DisplayPort interface. CCG1 for the Type-C to HDMI/DVI/VGA Adapter solution is available in two packages, 35-CSP and 40-QFN. Cypress’s USB Billboard controller (CY7C65210) on this cable solution is a Full-Speed USB 2.0 device that supports the USB Billboard Device Class. This device is available in a 24-QFN package.
CY7C65210 belongs to Cypress’s USB-Serial Bridge controller family and is similar to CY7C65211 which has a configurable USB to I2C/SPI/UART channel. The USB-Serial family has an underlying powerful architecture with a Cortex-M0 and 32KB flash which allows flexible variants of products such as the CY7C65210 billboard device, simply by developing custom firmware.
Cypress has developed a demo board (not for sale) to demonstrate connectivity between Type-C and HDMI. This demo board contains CCG1 (CYPD1120) in a 40-QFN package, USB Billboard controller (CY7C65210) in a 24-QFN package, Megachips DisplayPort to HDMI Protocol Convertor, a Type-C plug, a HDMI receptacle and several passive components. SWD headers are available for programming the CYPD1120 and CY7C65210 devices.
Cypress provides latest FW and configuration files (refer to Related Files section below) for CYPD1120 based on updates to the USB-PD and USB Type-C specifications. Cypress’s EZ-PD Configuration Utility can be used to program CYPD1120 with the right firmware and configuration settings. CYPD1120 and CY7C65210 are available in production. 도움이 필요하십니까? Ask a question and find answers in the Cypress Developer Community.