You are here

User Module Datasheet: SPI Master Datasheet SPIM V 1.30 (CY7C639/638/633/602/601xx, CYRF69xx3) | Cypress Semiconductor

User Module Datasheet: SPI Master Datasheet SPIM V 1.30 (CY7C639/638/633/602/601xx, CYRF69xx3)

최신 업데이트: 
2014년 5월 8일
버전: 
1.30

Features and Overview
 

  • Supports Serial Peripheral Interconnect (SPI) Master protocol
  • Supports SPI clocking modes 0, 1, 2, and 3
  • Programmable interrupt on SPI-done condition
  • SPI Slave devices can be independently selected
     

The SPIM User Module is a Serial Peripheral Interconnect Master. It performs full duplex synchronous 8- bit data transfers. SCLK phase, SCLK polarity, and LSB First can be specified to accommodate most SPI clocking modes. Controlled by user supplied software, you can configure the slave select signal to control one or more SPI Slave devices.

The SPI User Module also supports two wire serial devices such as optical mouse sensors that employ an SDIO/SCK interface.

번역 문서는 참고용으로만 제공하는 것입니다. 설계 과정에 참여할 경우에는 영어 버전 문서를 참고하는 것이 좋습니다.