EZ-PD™ CCG1 Type-C Port Controller

EZ-PD™ CCG1 Type-C Port Controller | Cypress Semiconductor

New Update: Learn about the new HDMI® over USB-C™ Alternate Mode using Cypress EZ-PD™ solutions

Don’t miss the rapid change over to the new, slimmer, all-in-one, 100-W, Type-C connector. CCG1, an Arm Cortex-M0 solution with 32KB flash, integrated Type-C Transceivers and up to 100-W PD support brings Type-C compliant power adapters, cables, notebooks, tablets and monitors to market faster. Cypress has reference designs readily available for EMCA and dongle applications. These are available online and could be used to speed-up our customers design cycle.

This USB Type-C solution includes a SPI/UART/I²C port, up to 30 GPIOs and a royalty-free USB-IF Power Delivery 2.0 compliant stack. CCG1 provides a simple, low-cost way to add USB Type-C with 100-W Power Delivery to any system. EZ-PD CCG1 USB Power Delivery (PD) controllers have got the USB Implementers Forum (USB-IF) certification for USB Type-C™.

Please click here for EZ-PD Software Development Kit.

CCG1 Product Features

48-MHz Arm® Cortex®-M0 Processor
32 KB Flash and 4 KB SRAM
USB 3.1 Type-C Support
- Integrated Transceiver
- Supports routing of USB and alternative protocols to an external MUX
Power Delivery Support
- Provider and consumer roles
- Support for all five power profiles
Integrated Analog
- 12-bit, 1-Msps ADC for V_BUS voltage and current monitoring
- Dynamic overcurrent and overvoltage protection
Integrated Digital
- Two configurable 16-bit TCPWM blocks
- One Serial Communication Block (SCB): I²C master or slave, SPI master or slave, or UART
- Up to 30 GPIOs
Low-power Operation
- 1.3-µA deep sleep current
- 1.3-mA sleep current
Multiple Package Options
- 40-pin QFN (36 mm²)
- 16-pin SOIC (60 mm²)
- 35-pin WLCSP (6.8 mm²)

Download the CCG1 Datasheet
Watch the CCG1 Demo Video and the Type-C 101 Video Series
Order a CY4501 CCG1 Development Kit
Refer to CCGx FAQ page and the Type-C Reference Designs page
Contact Sales for more information

Document Type	제목
데이터시트	CCG1: USB Type-C Port Controller Datasheet
Roadmap	USB Roadmap
Product Overview	CCG1: USB Type-C Port Controller

CY4500

EZ-PD™ Protocol Analyzer

The CY4500 EZ-PD™ Protocol Analyzer records traffic passively on the Configuration Channel (CC) and allows user to analyze and debug USB Power Delivery communication.

BUY $199.00

자세히

CY4501

CCG1 Development Kit

The CY4501 CCG1 Development Kit (DVK) is based on the CCG1 product family (CYPD11xx) of Cypress’s USB microcontrollers. This DVK is primarily intended to be a development vehicle for USB host and client systems that house a Type-C connector as well as for EMCA cables.

BUY $499.00

자세히

지원

Developer Community(CDC)

View All Support Options

USB Type-C Specification

USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

EZ-PD CCG1: USB Type-C Port Controller With PD

Click to view EZ-PD CCG1 Quick Presentation