You are here

EZ-PD™ CCG3 Type-C Port Controller with PD | Cypress Semiconductor

EZ-PD™ CCG3 Type-C Port Controller with PD

EZ-PD™ CCG3 is Cypress’s newest USB Type-C port controller with Power Delivery. CCG3 provides a complete solution ideal for Power Adapters, Power Banks, Type-C Dongles, Thunderbolt Accessories, Monitors, Docks and Notebooks. EZ-PD CCG3 reduces BOM by integrating a Billboard Controller, Crypto engine, OVP and OCP, dual 64KB flash memory, and 2:2 cross-bar switch.

CCG3 is capable of supporting Upstream Facing Port (UFP), Downstream Facing Port (DFP), and Dual Role Port (DRP) and will fully support the latest Power Delivery 3.0 specification. CCG3 is a programmable solution, and its dual 64KB flash memory can be used for fail-safe firmware upgrades at any time. CCG3 has direct 20-V operation including VBUS gate drivers, high-voltage regulator and OVP/OCP.

Cypress has USB Type-C and Power Delivery reference designs readily available for various applications. These are available online and can be used to speed up the design cycle.

Please click here for EZ-PD Software Development Kit.

EZ-PD™ CCG3 Product Features

  • 32-bit MCU Subsystem
    • 48-MHz ARM® Cortex® -M0 Processor
    • Dual 64KB Flash with fail-safe firmware updates
  • USB-C Support with Power Delivery
    • Integrated transceiver, supporting one Type-C port
    • Integrated UFP (RD), DFP (RP) and EMCA (RA) termination resistors
    • Compliant with USB PD supporting all standard power profiles
  • Integrated Digital Blocks
    • Four timers, counters and PWMs and up to 24 GPIOs
    • Four SCBs for configurable master/slave I2C, SPI or UART
    • Integrated USB Billboard Controller with Billboard Device Class support
    • Integrated Crypto Engine with USB Authentication support
  • Integrated Analog Blocks
    • Direct 20-V operation
    • Two VBUS gate drivers
    • 2:2 cross-bar switch
  1. Watch the Type-C 101 Video Series
  2. Download the CCG3 Datasheet
  3. Buy the CY4531 EZ-PD CCG3 Evaluation Kit
  4. Refer to the CCGx FAQ page and the Type-C Reference Design page
  5. Get your schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System
Document Type 제목
데이터시트 CCG3: USB Type-C Controller Datasheet
Roadmap USB Roadmap
Product Overview CCG3: USB Type-C Controller with Power Delivery

CY4500 EZ-PD™ Protocol Analyzer:

The CY4500 EZ-PD™ Protocol Analyzer records traffic passively on the Configuration Channel (CC) and allows user to analyze and debug USB Power Delivery communication.

Price: $200.00

Learn More Add to Cart

Click to Enlarge


CY4531 EZ-PD CCG3 Evaluation Kit:

The CY4531 EZ-PD CCG3 Evaluation Kit is used to emulate a USB Type-C Host system. This kit features a Type-C host board along with a CCG3 daughter card.

Price: $250.00

Learn More Add to Cart

Click to Enlarge


USB Type-C Specification

USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

USB 3.1 specification (including Type-C)

USB Power Delivery

The New USB Type-C Cable

EZ-PD CCG3: USB Type-C Controller With Power Delivery

Click to view EZ-PD CCG3 Quick Presentation