You are here

EZ-PD™ CCG3PA USB Type-C and Power Delivery | Cypress Semiconductor

EZ-PD™ CCG3PA USB Type-C and Power Delivery

EZ-PD™ CCG3PA is Cypress’s USB Type-C and Power Delivery controller targeting Power Adapter, Mobile Charger, Car charger and Power Banks. CCG3PA supports Power Delivery 3.0, Quick Charge 4.0, integrated VBUS-to-CC short protection, 30V-tolerant regulator, high-voltage PFET gate drivers, VBUS Over-Voltage and Over-Current Protection, and ESD protection.

CCG3PA supports Downstream Facing Port (DFP), Upstream Facing Port (UFP), and Dual Role Port (DRP) and fully supports the Power Delivery 3.0 Programmable Power Supply specification. CCG3PA is a programmable solution with 64KB flash for firmware upgrade.

Cypress has USB Type-C and Power Delivery reference designs readily available online for various applications which can be used to speed up the design cycle.

Please click here for EZ-PD CCGx Power Software Development Kit (SDK) support for CCG3PA.

Please click here for EZ-PD Software Development Kit.

EZ-PD™ CCG3PA Product Features

  • USB Type-C and Power Delivery 3.0 Programmable Power Supply
  • 2x Legacy/Proprietary Charging Blocks: BC v1.2, Apple Charging, Qualcomm Charging 4.0, Samsung AFC
  • Integrated Digital Blocks
    • Four timers, counters and PWMs and up to 12 GPIOs
    • Two SCBs for configurable master/slave I2C, SPI or UART
  • Integrated Analog Blocks
    • 30V-tolerant regulator
    • VBUS-to-CC short protection
    • Integrated Voltage (VBUS) Regulation and Current Sense Amplifier
    • Two high-voltage PFET gate drivers
    • Two VBUS discharge NFET
  • System-Level Fault Protection
    • On-chip OVP, OCP, UVP, and SCP
    • Supports OTP through integrated ADC circuit
  • 32-bit MCU Subsystem
    • ARM Cortex-M0 CPU
    • 64KB Flash
    • 8KB SRAM
  • 패키지: 24-pin QFN and 16-pin SOIC
  • Supports extended industrial temperature range (–40 °C to +105 °C)
  1. Watch the Type-C 101 Video Series
  2. Download the CCG3PA Datasheet and Getting Started EZ-PD CCG3PA
  3. Buy the CY4532 EZ-PD CCG3PA Evaluation Kit
  4. Refer to the CCGx FAQ page and the Type-C Reference Design page
  5. Get your schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System
CY4532 EZ-PD™ CCG3PA Evaluation Kit

CY4532 EZ-PD™

CCG3PA Evaluation Kit

The EZ-PD™ CY4532 CCG3PA Evaluation Kit (EVK) is based on the CCG3PA product family (CYPD37xx) of Cypress's USB Type-C controller with Power Delivery for Power Adapters, Power Bank, Car Chargers.

CY4500 EZ-PD™ Protocol Analyzer

CY4500 EZ-PD™

Protocol Analyzer

The CY4500 EZ-PD™ Protocol Analyzer records traffic passively on the Configuration Channel (CC) and allows user to analyze and debug USB Power Delivery communication

USB Type-C Specification

USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

USB 3.1 specification (including Type-C)

USB Power Delivery

The New USB Type-C Cable

EZ-PD USB-C CCG3PA: Add PD 3.0 and QC 4.0 to Your USB Power Adapter

EZ-PD USB-C CCG3PA Quick Presentation Image

Click to view EZ-PD USB-C CCG3PA Quick Presentation