You are here

홈 › 제품 › USB 컨트롤러 › USB-C and Power Delivery › EZ-PD™ CCG4: Two-Port USB Type-C Controller with Power Delivery

EZ-PD™ CCG4: Two-Port USB Type-C Controller with Power Delivery | Cypress Semiconductor

EZ-PD™ CCG4: Two-Port USB Type-C Controller with Power Delivery

참조 설계
제품 선택기 안내
Type-C 101 Video Series

New Update: Learn about the new HDMI® over USB-C™ Alternate Mode using Cypress EZ-PD™ solutions

EZ-PD™ CCG4 is Cypress’s newest USB Type-C port controller with Power Delivery. CCG4 provides a two-port USB-C solution ideal for Desktops, Notebooks and Systems like Power Banks, Monitors and Docks. CCG4 is based on Cypress’s PSoC technology with 128KB flash memory supporting fail-safe boot up. CCG4 supports Upstream Facing Port (UFP), Downstream Facing Port (DFP), and Dual Role Port (DRP) modes. CCG4 reduces BOM by integrating four 1W VCONN FETs, Over-Voltage and Over-Current Protection and 15kV system level ESD protection.  

Cypress has USB Type-C and Power Delivery reference designs available for various applications. These are available online and can be used to speed up the design cycle.

Please click here for EZ-PD Software Development Kit.

EZ-PD™ CCG4 Product Features

  • 32-bit MCU Subsystem
    • 48-MHz ARM® Cortex® -M0 Processor
    • 128KB Flash memory supporting fail-safe boot up
  • USB-C Support with Power Delivery
    • Integrated transceiver, supporting two Type-C ports
    • Integrates two pairs of VCONN FETs
    • Integrated UFP (RD) and DFP (RP) termination resistors
    • Compliant with USB PD 2.0 supporting all standard power profiles
  • Integrated Digital Blocks
    • Four timers, counters and PWMs and up to 24 GPIOs
    • Four SCBs configurable as master/slave I2C, SPI or UART interfaces
    • Four 8-bit SAR ADCs to support OVP and OCP
  1. Watch the Type-C 101 Video Series
  2. Download the CCG4 Datasheet
  3. Buy the CY4541 EZ-PD CCG4 Evaluation Kit
  4. Refer to CCGx FAQ page and Type-C Reference Design page
  5. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System

    CY4500 EZ-PD™ Protocol Analyzer:

    The CY4500 EZ-PD™ Protocol Analyzer records traffic passively on the Configuration Channel (CC) and allows user to analyze and debug USB Power Delivery communication.

    자세히

    Click to Enlarge

     

    CY4541 EZ-PD™ CCG4 Evaluation Kit:

    The CY4541 EZ-PD CCG4 Evaluation Kit is used to emulate a USB Type-C Host system. This kit features a Type-C host board along with a CCG4 daughter card.

    자세히

    Click to Enlarge

    USB Type-C Specification

    USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

    USB 3.1 specification (including Type-C)

    USB Power Delivery

    EZ-PD CCG4: Two-Port Type-C Controller With Power Delivery

    Click to view EZ-PD CCG4 Quick Presentation