You are here

EZ-PD™ CCG6: One-Port USB Type-C and Power Delivery | Cypress Semiconductor

EZ-PD™ CCG6: One-Port USB Type-C and Power Delivery

EZ-PD™ CCG6 is Cypress’ one-port USB Type-C™ and Power Delivery controller targeting PCs and Notebooks. CCG6 integrates a VBUS provider path load switch controller along with USB authentication support, VBUS-to-CC short protection, VBUS-to-SBU short protection, 20V-VBUS regulator, high-voltage PFET gate drivers, SBU and USB HS mux, VBUS Over-Voltage and Over-Current Protection, and ESD protection.

CCG6 supports Downstream Facing Port (DFP), Upstream Facing Port (UFP), and Dual Role Port (DRP) and will fully support the Power Delivery 3.0 specification. CCG6 is a programmable solution with 128KB flash supporting fail-safe boot up and firmware upgrade.

Cypress has USB Type-C and Power Delivery reference designs readily available online for various applications, which can be used to shorten design cycle times.

EZ-PD™ CCG6 Product Features

  • USB Type-C and Power Delivery 3.0 supporting USB and Thunderbolt, DisplayPort Alternate Mode platforms
  • Integrated Digital Blocks
    • Two timers, counters, PWMs, and up to 17 GPIOs
    • Four SCBs for configurable master/slave I2C, SPI or UART
  • Integrated Analog Blocks
    • Load switch controller for provider path
    • Integrated high-voltage 20V-regulator
    • SBU analog mux, USB analog mux
    • VBUS-to-CC short protection
    • VBUS-to-SBU short protection
    • VCONN FETs supporting 600mA
    • High-side current sense amplifier across 5 mohms
    • Legacy charge-detect block (BC v1.2, Apple Charging)
    • High-voltage PFET gate drivers
    • VBUS discharge NFET
  • System-Level Fault Protection
    • Over-current, Over-voltage, Reverse-current and Short-circuit protection
    • VCONN over-current protection
  • 패키지: 40-QFN (6x6 mm)
  1. Watch the Type-C 101 Video Series
  2. Download the CCG6 Datasheet
  3. Refer to CCGx FAQ page and Type-C Reference Design page
  4. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System
Document Type 제목
데이터시트 CCG6: One-port USB Type-C Controller with Power Delivery Datasheet
Roadmap USB Roadmap

USB Type-C Specification

USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

USB 3.1 specification (including Type-C)

USB Power Delivery

The New USB Type-C Cable