You are here

EZ-PD™ CCG7D Consumer : Dual-port USB-C PD controller with integrated Buck-Boost controller | Cypress Semiconductor

EZ-PD™ CCG7D Consumer : Dual-port USB-C PD controller with integrated Buck-Boost controller

EZ-PD™ CCG7D is a highly integrated and programable dual-port USB Type-C Power Delivery (PD) solution with integrated Buck-Boost controllers. It complies to the latest USB Type-C and PD specifications, and is targeted for multi-port consumer charging applications.

CCG7D supports a wide input voltage range (4V-24V with 40V tolerance) and programmable switching frequency (150 kHz-600 kHz) in an integrated PD solution. Integration offered by CCG7D not only reduces the BOM but also provides a footprint optimized solution to support higher power density designs.

CCG7D supports advanced features such as dynamic load-sharing, signed field firmware upgrade, and optimized buck input voltage.

Logic Block diagram

CCG7D Block Diagram


  • Multi-port consumer USB-C PD chargers
  • Multi-port USB-C PD AC-DC power adaptor


  • Supports two USB-PD ports
  • Supports latest USB-PD 3.0 version 2.0 including Programmable Power Supply (PPS) Mode
  • Extended Data Messaging


  • Configurable resistors RP and RD
  • VBUS NFET Gate driver
  • Integrated 100-mW VCONN power supply and control

2x Buck-Boost Controller

  • 150 kHz to 600 kHz switching frequency
  • 5.5V to 24V input, 40V tolerant
  • 3.3V to 21.5V output
  • 20-mV voltage and 50-mA current steps for PPS
  • Supports selectable Pulse Skipping Mode (PSM) and Forced Continuous
  • Current/Conduction Mode (FCCM)
  • Supports soft start
  • Programmable Spread Spectrum Frequency modulation for low EMI
  • Programmable phase shift across two ports to further reduce the EMI

2x Legacy/Proprietary Charging Blocks

  • Supports QC4+, QC4.0, Samsung AFC, Apple 2.4A, and BC v1.2 charging protocols

Integrated Voltage (VBUS) Regulation and Current Sense Amplifier (CSA)

  • Integrated shunt regulator function for VBUS control
  • Constant current or constant voltage mode
  • Supports current sensing for constant current control
  • System-Level Fault Protection
  • On-chip VBUS, overvoltage protection (OVP), overcurrent protection (OCP), undervoltage protection (UVP)• VBUS to CC short protection
  • Under-voltage lockout (UVLO)
  • Supports over-temperature protection through integrated ADC circuit and internal temperature sensor
  • Supports connector and board temperature measurement using external thermistors
  • 32-bit MCU Subsystem
  • 48-MHz Arm Cortex-M0 CPU
  • 128-KB Flash
  • 16-KB SRAM
  • 32-KB ROM

Peripherals and GPIOs

  • 19 GPIOs
  • Two over-voltage GPIOs
  • 3x 8-bit ADC
  • 4x 16-bit Timer/Counter/PWMs (TCPWM)

Communication Interfaces

  • 4x SCBs (I2C/SPI/UART)

Clocks and Oscillators

  • Integrated oscillator eliminating the need for an external clock

Power Supply

  • 4 V to 24 V input (40-V tolerant)
  • 3.3 V to 21.5 V output
  • Integrated LDO capable of 5 V @ 150 mA


  • 68-pin QFN (8 mm x 8 mm) package with –40 °C to +105 °C extended industrial temperature range
  1. Watch the Type-C 101 Video Series
  2. Refer to CCGx FAQ page and Type-C Reference Design page
  3. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System
Document Type 제목
Roadmap USB Roadmap
참조 설계 Type-C Power Adapter Reference Design
Product Brief CCG7D Consumer Product Brief

CCG7D reference schematics are available for Multi-port AC-DC power adapter designs and two port Car cigarette lighter adapter (CLA) designs. For more information please refer the Type-C Power Adapter Reference Design page.

If you need the daughter cards based on the above schematics then please contact your local Cypress Sales team.