You are here

EZ-PD™ CMG1 USB-C EMCA Controller | Cypress Semiconductor

EZ-PD™ CMG1 USB-C EMCA Controller

EZ-PD™ CMG1 is Cypress’ dedicated Electronically marked cable assembly (EMCA) controller targeting passive non-Thunderbolt and Thunderbolt Type-C cables. CMG1 supports Power delivery 3.0, Type-C 1.3, integrated VBUS-CC short protection, VBUS-VCONN short protection and ESD protection all offered in a small footprint 9-ball WLCSP package.

CMG1 is built to operate from 2.7-5.5 V VCONN supply range with a 40 byte of storage for vendor- and cable-specific configuration data.

CMG1 passive EMCA paddle card reference design is available here to speed up the design cycle.

Please click here for EZ-PD Software Development Kit.

Product Features

  • Supports USB PD3.0 spec and USB Type-C spec version 1.3
  • Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector
  • Integrated 40 bytes for storing vendor- and cable-specific configuration data
  • Termination resistor RA on VCONN1 and VCONN2
  • Supports RA weakening to reduce power consumption
  • IEC ESD protection on VCONN and CC
  • Wide operating voltages: 2.7 – 5.5 V
  • 패키지: 9-ball WLCSP (1.35 x 1.35 mm)
  • Supports industrial temperature grade (-40 °C to +85 °C)
  1. Watch the Type-C 101 Video Series
  2. Download the CMG1 Datasheet and Getting Started EZ-PD CMG1
  3. Build the USB-C passive EMCA paddle card using the CMG1 reference design
  4. Download the EZ-PD Configuration Utility to configure vendor- and cable-specific configuration data in the CMG1 of your USB-C cable
  5. Refer to CCGx FAQ page
  6. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System
Document Type 제목 영어 중국어 일본어
데이터시트 CMG1: USB Type-C EMCA Controller Datasheet - -
애플리케이션 설명 AN221499 - GETTING STARTED WITH EZ-PD CMG1 - -
Roadmap USB Roadmap - -
Product Overview CMG1: USB Type-C EMCA Controller Data - -

USB Type-C Specification

USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

USB 3.1 specification (including Type-C)

USB Power Delivery

The New USB Type-C Cable